Parts Washers Blast Cabinets Abrasives Accessories Information Site Map


Portable Pressure Blast Systems

MODEL 400
40 LB CAPACITY
MODEL 1000
100 LB CAPACITY

Dee-Blast Portable Pressure Blasters are designed to make the most efficient use of your
compressed air and abrasive supply. These are not siphon units. The tank is filled with air
and blast media under pressure. When the valve is opened, the media/air mixture is
released under tremendous pressure. This operation quickly removes rust, paint, scale and
other coatings. Pressure blasters are 3 to 5 times faster than siphon fed machines.

Both units arrive complete with air gauge, pressure vessel, sandblast hood, and sandblast
hose. Simply fill with abrasive and attach to your air supply and you are ready to begin
blasting. Optional deadman valve available.

SPECIFICATIONS MODEL 400 MODEL 1000 MODEL 2500
Operating Pressure 60-125 psi 60-125 psi 60-125 psi
A.S.M.E Coded Vessel NO YES YES
Sandblast Hose 7' 10' 25'
Abrasive Capacity 40-50 lb. 100-120 lb. 250-300
Nozzle Size 1/8" 1/8" 1/4"


NOZZLE SELECTION CHART
ORIFICE SIZE CFM REQUIRED COVERAGE RATE
sq./ft./minute
3/32" 7 0.5
1/8" 15 1
3/16" 40 2
1/4" 80 2.5

SAFETY TIP

The pressure blast systems shown here do DO NOT have automatic safety equipment.  EXTREME CAUTION  should be used when operating these units. The pressure vessel is under pressure at all times when attached to an air supply. Whenever the unit is charged with sand, or any type of maintenance is performed, the pressure vessel MUST be disconnected from the air supply and all air exhausted from the tank. Failure to do so could result in serious personal injury or property damage (Safety Shut off optional)

ABRASIVES

Black Beauty
Economical, fast cutting abrasive. For quick removal of paint and rust. Part# 443 - 80 lb. Bag
Plastic Abrasive
Ideal for removal of coatings from composites and soft metals. Part # 4005

ACCESSORIES

Deadman Valve
Carbon steel ball valve with spring loaded handle. When lever is released valve closes automatically, stopping media and air flow. Part # 2253
Cotton Twill Hood With Bump Cap
For protecting the head, face and neck from dust. Provides Light duty protection for use in well ventilated areas. Part # 414
Duck Hood With Bump Cap
Heavy canvas material for protecting the head, face and neck from dust. Provides medium duty protection for use in well ventilated areas. Part # 415


3039 Johnson Road Stevensville, MI. 49127
Phone (269)-428-2400  Fax (269)-428-3977
VISA / MASTERCARD ACCEPTED


D e e - B l a s t   -   M o d e l  4 0 0  &   M o d e l  1 0 0 0