INDUSTRIAL DUTY
ABRASIVE BLAST CABINET
 |
| Working
Capacity up to 35 Cubic Ft. Load Capacity up to 800 Lbs. Two Full Side Opening Doors 36" Diameter Turntable Speeds Production |
Clean
Large Molds and Dies Deburr Edges on Machined or Molded Parts Remove Heat scale, Excess Solder and Weld Discoloration |
SPECIFICATIONS
| OVERALL:
76" H x 44" W x 44" D INSIDE: 34" H x 42.5" W x 43" D EXHAUST: 405 CFM |
LIGHTING:
Two Fluorescent Bulbs Air Requirement: 18 CFM (OPTIONAL 45 CFM) ELECTRICAL: 115 V 60 hz |
| The Dee-Blast model
50 is ideal for in-shop cleaning of metals,
plastics and some woods.
The system is sealed, preventing dust and contaminates from escaping
into the work area.
Blasting action is controlled by easy to use foot-pedal action gun.
Dust collects in reusable
filter bags. No harmful chemicals are used. The dust collection system is more economical because the exhaust unit is designed and engineered for the machine. It collects only dust size particles from the cabinet, Media meant for recycling falls into the hopper to be blasted again. The dust collection units are an integral part of the machine, making the model 50 space saving and easy to maintain. All Dee -Blast Abrasives have been tested in the model 50 and proven to be effective in performing a wide range of services. From cleaning and finishing parts where close tolerances are critical with glass beads, to light metal deburring with course metallic abrasives. Abrasive is easily changed through media cleanout at bottom of hopper. The new high out-put gun system has a long lasting carbide nozzle and air jet. The standard size nozzle requires 18 cfm of compressed air. An optional 45 cfm nozzle and air jet combination is available. As with all Dee-Blast Cabinets, the model 50 has a tough powder coat paint finish. |
3039 Johnson Road Stevensville, MI. 49127
Phone (269)-428-2400 Fax (269)-428-3977
VISA / MASTERCARD ACCEPTED